Skip to content

Solar panel cleaning in Belgium.

Robotic cleaning by a VCA and IPAF certified team, including a thermal imaging inspection and report.

Average yield increase
+8%
Business clients
500+
Countries: BE, NL, FR and DE
4
Cleaning robot on a large roof, with an aerial work platform next to it

Why solar panels in Belgium get dirty faster than you think

Belgium’s climate and dense built environment produce a typically Belgian mix of soiling. Unlike in dry or tropical countries, the dirt here doesn’t come from a single source but from several at once: fine dust from traffic, pollen and ammonia from farming, salt from the sea wind, and bird droppings that damp Belgian winters make especially stubborn.

  • Built-up areas and heavy traffic

    Almost 40% of Belgium’s population lives in the Antwerp-Brussels-Ghent triangle. Solar panels in this area are constantly exposed to fine dust, soot and rubber particles from the E40, E17, E19 and E313 motorways. Along these routes, we measure an average yield loss of 8–12% after 18 months without cleaning.

  • Intensive farming in Flanders and Wallonia

    West Flanders, Limburg and Hesbaye have a high concentration of livestock and arable farming. Ammonia from livestock sheds binds to fine dust and forms a sticky film on the glass. During the pollen season, from April to June, we measure yield losses of up to 20% on agricultural installations within 2 km of intensive farms.

  • The coast and a damp climate

    Within 15 km of the North Sea, panels collect salt and sand. Combined with 200 rainy days a year, this quickly leads to algae and limescale. For homes on the coast, cleaning every six months is therefore often better than once a year.

Large rooftop solar installation in a rural area of West Flanders

Active throughout Belgium

Our team is based in Tessenderlo-Ham and on the road every day in all Belgian provinces. Within Belgium, we charge no distance surcharge.

We clean solar panels in every Belgian municipality. Just request a quote: within 24 hours, we’ll let you know when we can be in your area.

Request a quote

How to have your solar panels cleaned by Solarco

From request to report usually takes 1 to 3 weeks, depending on the season and region. You don’t need to be there.

  1. 1

    Quote (5 min)

    Fill in the online form with the number of panels, the address and the type of installation. You can add a photo if you like. You’ll receive a tailored price within 24 hours.

  2. 2

    Scheduling (within 1–2 weeks)

    We call you to set a date. If the weather is bad, we reschedule free of charge. You’ll receive an email confirmation with the time slot and the name of your operator.

  3. 3

    Cleaning (2–4 hours for homes)

    Our team arrives with an pure water tank and a robot or telescopic brush. You don’t need to be at home. We take before photos, clean every panel and finish with after photos.

  4. 4

    Report and advice

    Within 48 hours, you’ll receive a PDF report by email with all before and after photos, any findings from the inspection and advice for your next clean.

Request a quote
Cleaning robot with an pure water hose on rooftop solar panels

What Belgian customers get out of a clean

From homes and commercial roofs to large solar parks: our specialists have cleaned solar panels in towns and villages across Flanders and the rest of Belgium, as well as in the Netherlands, France and Germany. With our mobile cleaning units and years of experience, we handle every installation thoroughly and sustainably, whatever its size and wherever it is.

View all our work

Why Belgian businesses choose Solarco

  1. 01

    VCA and IPAF certified

    All our operators are trained to work safely at height and with aerial work platforms, and hold VCA-VOL and IPAF 3a/3b certificates. We don’t use subcontractors.

  2. 02

    Our own robot fleet

    Battery-powered cleaning robots from certified manufacturers, suitable for more than 55,000 panels per job. Because we own the robots, there are no rental costs to pass on to you.

  3. 03

    Thermal imaging inspection included

    Every commercial and industrial job includes an infrared scan for hotspots. So you don’t just get clean panels: damage and faulty cells are caught early too.

  4. 04

    Fully insured

    We carry liability insurance and property damage insurance of up to €2.5 million per incident. If something does go wrong, our insurance pays, not you.

  5. 05

    Measurable reporting

    Every report includes before and after photos, our findings and the recommended cleaning frequency. For commercial and larger installations, it also contains thermal images. Useful for warranty claims and audits.

  6. 06

    No chemicals

    Only water and soft brushes, in line with the requirements of all major module manufacturers (JinkoSolar, LONGi, Trina, Q CELLS, REC). Your manufacturer’s warranty stays intact.

Frequently asked questions about solar panel cleaning in Belgium

Can’t find your question? Browse all frequently asked questions or get in touch.

All frequently asked questions
Do you work throughout Belgium, or only in Flanders?

We work in all 10 Belgian provinces and the Brussels-Capital Region. Our team speaks Dutch and French. For customers in Wallonia, all communication and reporting is entirely in French.

How soon can you come?

Usually within 1 to 3 weeks of accepting the quote, depending on the season. April to October is our busiest period, so ideally plan 3 to 4 weeks ahead. In urgent cases, such as visible damage or an insurance claim, we can often be there within 5 working days.

Is solar panel cleaning tax-deductible for Belgian businesses?

Yes. As a Belgian business, you can deduct our invoice in full as a maintenance cost and recover the VAT (21%). For larger solar parks, cleaning is often recorded as an operating cost within the depreciation period.

Do you work with installers?

Yes, we work with several Belgian installers who offer cleaning to their customers as a maintenance service. Are you an installer who would like to offer cleaning under your own name (white label)? Give us a call.

Does your insurance also apply outside Flanders?

Yes. Our liability and property damage insurance covers the whole of Belgium without restriction. The same terms apply in Kortrijk as in Eupen.

How often should I have my solar panels cleaned in the Belgian climate?

That depends on the location and type of installation. Homes in town: every 1 to 2 years. Commercial buildings in an industrial or rural area: once a year. Farms or sites near the coast: 1 to 2 times a year. Solar parks: 2 to 4 times a year, depending on how quickly they get dirty. After each clean, you’ll receive advice based on what we find on site.

Do you offer multi-year contracts?

Yes. Multi-year maintenance contracts (2–5 years) are popular with businesses and solar parks. You get a price guarantee, priority scheduling and typically a 10–15% discount compared with one-off cleans.

What if it rains on the scheduled day?

Light drizzle is no problem: our robots and operators keep working. In heavy rain, storms or winds above 40 km/h, we move the job to the next suitable day. Rescheduling is always free of charge.

Can I have several sites cleaned at once?

Certainly. For Belgian businesses with several sites, such as retail chains, logistics companies or agribusinesses, we’re happy to plan one round covering all locations. This usually earns you a volume discount, because we spend less time travelling.

Do you also work in the Belgian enclaves, such as Baarle-Hertog and Voeren?

Yes. Every Belgian municipality is part of our service area, including enclaves and border regions.

What our clients say

5.0Based on 16 Google reviews